Aluminum nickel cobalt magnet manufacturer: aluminum nickel cobalt introduction
When we talk about Alnico, what kind of Alnico are we talking about? In fact, in industrial applications, according to the different proportions of aluminum, nickel, cobalt and iron, we can get a variety of different slightly nickel-cobalt alloys. In English, we will add Roman numerals to distinguish them, such as Alnico II, Alnico V and so on. In Chinese, we can directly say "No. 2 Al-nickel-cobalt" and "No. 5 Al-nickel-cobalt".
Al-nico magnet manufacturer: Commonly used to make magnets for guitar pickups are No. 2, No. 3 and No. 5 Al-NICO magnets, which each have the following characteristics.
Al-co Magnet manufacturer: No. 2 Al-Ni Co (Al-NI Co II)- Moderate output, relatively not too much high and low frequency. When Leo started as a broadcaster, he used # 2 aluminum-nickel-cobalt as a pickup magnet. Many of today's vintage double coil pickups also use a # 2 aluminum-nickel-cobalt magnet.
Aluminum nickel-cobalt magnet manufacturer: No. 3 Aluminum nickel-cobalt (aluminum nickel-cobalt III) -- This "aluminum nickel-cobalt" actually does not add cobalt, and the output is smaller than other types of aluminum nickel-cobalt, its high and low frequency is relatively convergence, so it will give people a more "warm" feeling.
In the 50's Tele, the 3 AlNi-Co pickups and cymbal bodies combined with the brass code resulted in a bright and warm "string sound"; Many vintage jazz electric guitars also use a 3-gauge AlNi-Co magnet to pick up the sound to achieve the mellow, soft guitar sound of traditional jazz
Alnico V - This has been the most commonly used Fender pickup magnet since the mid to late 1950s. It has a fuller output and a brighter sound than the 2 and 3. The single-coil pickup made of No. 5 Al-Ni Co, combined with the appropriate sound box and effect device, can also play a powerful overload and distortion of sound color, so that it is competent for most music styles. This is the reason why several series and models of Fender use No. 5 Al-Ni Co to make pickups.
In addition, No. 4 aluminum-nickel-cobalt, whose timbre is between No. 2 and No. 5, is occasionally used by Fender. Pick maker Tim Shaw, for example, used a No. 4 aluminumnickel-cobalt magnet to build pickups on several models of the 2019 American Performer series.
Of course, magnets are only one of the factors that affect the sound characteristics of a pickup. When we introduce the characteristics of various magnets above, other variables such as coil material and winding number are set aside for discussion. When analyzing the overall timbre characteristics of a pickup, these other variables should also be taken into account.
